Parts: 8
Material: Poyurethane casting resin, photo etched parts
Unpainted Kit
Parts:
Bomb Carbonit 4,5kg 3 Stk.
Bomb Carbonit 10kg 2 Stk.
Bomb Carbonit 20kg 2 Stk.
Windscreen for all bomb types
Before assembly, check the fit and remove the release agent with isopropyl alcohol or acetone. Cut off sprues with a saw/cutter. Wear a dust mask or respiratory mask when machining to avoid inhaling dust particles.
Carefully heat warped parts (e.g. with a hairdryer) and bend them into shape. Glue with 2K or superglue. Unpainted cast parts darken over time and can turn yellow - especially when exposed to UV light.
Assembly
- Remove the windscreen (1), carefully bend it over a round rod (D = 3-4mm) and glue it to the overlap.
- Turn the two legs inwards and bend the lower ends backwards.
- Put the windscreen over the bomb and glue it to the body with thin superglue.
- Remove the bracket (2) and insert it into the windscreen. Secure with glue!
Painting Guide
Igniter / Propeller: brass
Bombshell and windscreen: light to medium gray. The bomb was also delivered with smoke set (painted black ring).
With the 4.5kg bombs a distance bar is used for the better fragmentation effect against living targets in the free one.
Sometimes there is also a slip of paper attached to the instructions for use.
