Aviation fuel cans, RFC
SOLD OUT
Scale: 1:32 / 54mm
Parts: 6
Material: Poyurethane casting resin, lasercut cardbord
Unpainted Kit
Parts: 6
Material: Poyurethane casting resin, lasercut cardbord
Unpainted Kit
Before assembly, check the fit and remove the release agent with isopropyl alcohol or acetone. Cut off sprues with a saw/cutter. Wear a dust mask or respiratory mask when machining to avoid inhaling dust particles.
Carefully heat warped parts (e.g. with a hairdryer) and bend them into shape. Glue with 2K or superglue. Unpainted cast parts darken over time and can turn yellow - especially when exposed to UV light.
Aviation fuel can: black metal; white lettering; screw cap brass
