Carbonit incendiary bomb 10kg
-20%
Scale: 1:32 / 54mm
Parts: 5
Material: Poyurethane casting resin, photo etchend parts
Unpainted Kit
Parts: 5
Material: Poyurethane casting resin, photo etchend parts
Unpainted Kit
Before assembly, check the fit and remove the release agent with isopropyl alcohol or acetone. Cut off sprues with a saw/cutter. Wear a dust mask or respiratory mask when machining to avoid inhaling dust particles.
Carefully heat warped parts (e.g. with a hairdryer) and bend them into shape. Glue with 2K or superglue. Unpainted cast parts darken over time and can turn yellow - especially when exposed to UV light.
assembly
-Part 1 Cut out (wind trap) bend over a rod (d = 4mm) and stick to the overlap
-The four legs turn inward and the lower ends opposite bend back.
Place wind trap and fix it with superglue.
-Cut out part 2 (carrying handle) and insert into the wind trap. Fix him with superglue!
fuse: Brass; airscrew metal
bomb body and wind trap: Probably medium to dark gray. Some contemporary pictures shows a painted black ring around the bomb body (with smoke generator?). In other instances, however, a painted bright ring (white, yellow?) we can spot (meaning unknown). Sometimes we find a note stuck with the instructions for use at the bomb body.
bomb body and wind trap: Probably medium to dark gray. Some contemporary pictures shows a painted black ring around the bomb body (with smoke generator?). In other instances, however, a painted bright ring (white, yellow?) we can spot (meaning unknown). Sometimes we find a note stuck with the instructions for use at the bomb body.
